Nailers/Staplers
HighPro Nailers and Staplers
Pneumatic Flooring Cleat Nailers and Staplers
- FS-50 Stapler
- LFN-50 Cleat Nailer
High performance driving of cleats or staples - without wearing you out.
| Magazine capacity: | 100 cleats or staples |
|---|---|
| Drive angle: | 45" |
| Cleat length: | 1-1/2 to 2 in. |
| Staple length: | 1-1/2 to 2 in. |
| Tool weight: | 9.5 to 9.9 lbs. |
Interchangeable magazine-drive blade sets allow the same tool to drive either cleats or staples. Available with long or short handle.
Pneumatic Laminated Flooring Stapler
AS-3297
For the fast and precise installation of laminated flooring
| Floor thickness: | 1/4 to 9/16 in. |
|---|---|
| Magazine capacity: | 100 staples |
| Drive angle: | 45" |
| Staple length: | 1 or 1-1/4 in. |
| Tool weight: | 3.7 lbs. |
Bostitch Nailers and Staplers
Industrial Manual Flooring Cleat Nailer
MFN 200
Aluminum housing, extra-wide composite base plate for added stability, rubber bumpers to protect against marring, long-reach handle, mallet included.
| Fastener range: | 1-1/2 to 2 in. |
|---|---|
| Magazine capacity: | 200 |
| Tool weight: | 9.5 lbs. |
Industrial Flooring Cleat Nailer
MIIIFN
High-speed, mallet-actuated pneumatic operation increases productivity. Precisely drives L-shaped flooring cleats at proper angle and depth.Aluminum housing, extra wide composite base plate, long-reach handle, high capacity magazine, mallet included.
| Driving power (Inch Lbs.): | 420 |
|---|---|
| Fastener range: | 1-1/2 to 2 In. |
| Magazine capacity: | 110 |
| Weight: | 11.2 lbs. |
Industrial Flooring Stapler
MIIIFS
High-speed, mallet-actuated pneumatic operation increases productivity. Precisely drives staples at proper angle and depth.Aluminum housing, extra wide composite base plate, long-reach handle, mallet included. Composite base plates included for the installation of both 1/2" and 3/4" hardwood flooring
| Driving power: | 420 |
|---|---|
| Fastener range: | 1-1/2 to 2 In. |
| Magazine capacity: | 92 |
| Operating pressure: | 60-100 |
| Weight: | 11.2 lbs. |
Industrial Jam-Free Laminated Hardwood Flooring Stapler
S3297-LHF-2
- Tool-free adjustable base will install 1/4" through 1/2" laminated flooring
- Precisely drives staples at proper angle and depth
- Exclusive jam-free magazine
- Composite housing, adjustable deflector
- Tapping block included
| Driving power: | 160 |
|---|---|
| Fastener range: | 3/8 to 1 In. |
| Magazine capacity: | 100 |
| Operating pressure: | 90-100 |
| Weight: | 3.3 lbs. |
Stanley-Bostitch Compressor
CAP 2045PT - OL
2 Horsepower Oil-Lubricated Stack Tank Air Compressor
CFM at 40 PSI:4.9
CFM at 90 PSI: 4.1
| Horse power: | 2 |
|---|---|
| Operating Pressure (PSI): | 0-125 |
| Tank Capacity: | 4.5 Gal |
Stanley Bostitch Nailers and Staplers
